About
PreSonus Eris Pro 6 Powered 6.5" 140W High-Definition Coaxial Studio Monitor (Single)
Key Features
- 6.5" Woofer and 1.25" Silk-Dome Tweeter
- 35 Hz to 20 kHz Frequency Response
- 103 dB SPL
- Single Point-Source Coaxial Design
- Wide Sweet Spot, Precise Phase Alignment
- Control Level, HPF, MF Trim, and HF Trim
- Acoustic Space Filter
- XLR, 1/4" TRS, and RCA Connections
- 140W Class-AB Bi-Amplification
- Wall and Ceiling Mountable
Audio engineers, producers, and musicians looking for a professional studio monitor with a wide stereo image and precision phase alignment will be impressed with the single PreSonus Eris Pro 6, an active 2-way studio monitor which employs a single point-source coaxial design for clear and accurate sound reproduction. This design provides superior phase alignment between components and delivers a wide sweet spot, precise stereo imaging, and symmetrical dispersion patterns. The Eris Pro 6 has unique advantages for Dolby Atmos immersive rooms as well as stereo mix environments.
Two Class-AB amplifiers deliver 75W to the 6.5" woven composite woofer and 65W to the 1.25" silk dome tweeter, which offers a snappy, accurate transient response. The monitor offers a frequency response from 20 kHz down to 35 Hz for a full-range sound without a subwoofer and plenty of volume (103 dB SPL). The rear panel provides acoustic tuning controls, including a three-position Acoustic Space switch that helps compensate for the boundary bass boost that can occur when a monitor is placed in a corner or near a wall. High and Mid controls help to further mitigate room anomalies, while a low cutoff filter makes it easy to integrate a subwoofer into your monitor setup. Lastly, provisions for wall and ceiling mounts make it easy to integrate Eris Pro 6 monitors into any stereo or multi-channel system.
Key Features at a Glance
- 6.5" woven composite low-frequency driver
- 1.25" ultralow mass, silk-dome, high-frequency driver
- 100 x 60° EBM waveguide provides a sweet spot
- 140W, Class AB dual amplification
- 35 Hz to 20 kHz frequency response
- 103 dB Peak SPL (at 1 m)
- Acoustic Tuning Controls:
- Acoustic Space (Flat, -2 dB, -4 dB)
- High Frequency (±6 dB, center 10 kHz, continuously variable)
- Mid Frequency (±6 dB, center 1 kHz, continuously variable)
- Low Cut (Flat, 80, 100 Hz at -12 dB/octave)
- Inputs:
- XLR and 1/4-inch TRS balanced rear-panel inputs
- RCA unbalanced rear-panel inputs
- Protection:
- RF interference
- Output-current limiting
- Over-temperature
- Turn-on/off transient
- Subsonic filter
- Power Saver mode (engages after 40 minutes)
- Wall and ceiling mountable
PreSonus Eris Pro 6 Powered 6.5" 140W High-Definition Coaxial Studio Monitor (Single)
Key Features
- 6.5" Woofer and 1.25" Silk-Dome Tweeter
- 35 Hz to 20 kHz Frequency Response
- 103 dB SPL
- Single Point-Source Coaxial Design
- Wide Sweet Spot, Precise Phase Alignment
- Control Level, HPF, MF Trim, and HF Trim
- Acoustic Space Filter
- XLR, 1/4" TRS, and RCA Connections
- 140W Class-AB Bi-Amplification
- Wall and Ceiling Mountable
Audio engineers, producers, and musicians looking for a professional studio monitor with a wide stereo image and precision phase alignment will be impressed with the single PreSonus Eris Pro 6, an active 2-way studio monitor which employs a single point-source coaxial design for clear and accurate sound reproduction. This design provides superior phase alignment between components and delivers a wide sweet spot, precise stereo imaging, and symmetrical dispersion patterns. The Eris Pro 6 has unique advantages for Dolby Atmos immersive rooms as well as stereo mix environments.
Two Class-AB amplifiers deliver 75W to the 6.5" woven composite woofer and 65W to the 1.25" silk dome tweeter, which offers a snappy, accurate transient response. The monitor offers a frequency response from 20 kHz down to 35 Hz for a full-range sound without a subwoofer and plenty of volume (103 dB SPL). The rear panel provides acoustic tuning controls, including a three-position Acoustic Space switch that helps compensate for the boundary bass boost that can occur when a monitor is placed in a corner or near a wall. High and Mid controls help to further mitigate room anomalies, while a low cutoff filter makes it easy to integrate a subwoofer into your monitor setup. Lastly, provisions for wall and ceiling mounts make it easy to integrate Eris Pro 6 monitors into any stereo or multi-channel system.
Key Features at a Glance
- 6.5" woven composite low-frequency driver
- 1.25" ultralow mass, silk-dome, high-frequency driver
- 100 x 60° EBM waveguide provides a sweet spot
- 140W, Class AB dual amplification
- 35 Hz to 20 kHz frequency response
- 103 dB Peak SPL (at 1 m)
- Acoustic Tuning Controls:
- Acoustic Space (Flat, -2 dB, -4 dB)
- High Frequency (±6 dB, center 10 kHz, continuously variable)
- Mid Frequency (±6 dB, center 1 kHz, continuously variable)
- Low Cut (Flat, 80, 100 Hz at -12 dB/octave)
- Inputs:
- XLR and 1/4-inch TRS balanced rear-panel inputs
- RCA unbalanced rear-panel inputs
- Protection:
- RF interference
- Output-current limiting
- Over-temperature
- Turn-on/off transient
- Subsonic filter
- Power Saver mode (engages after 40 minutes)
- Wall and ceiling mountable
PreSonus Eris Pro 6 2-Way Biamped, Active, 6.5-inch Coaxial Studio Monitor
- Regular price
- $399.99
- Sale price
- $399.99
- Regular price
-
Couldn't load pickup availability
Free 30 Day Return Policy
Shipping policy
Shipping policy
